Galvanized steel grating HEAVY DUTY PLX
for exterior flooringsecurityhigh-resistance

Add to favorites
Compare this product


galvanized steel
Product applications
for exterior flooring
Technical characteristics
security, high-resistance


Grating panels are made in a wide range of apertures with alternative sections of bearing and transverse bar to meet loading, span and ventilation requirements. Cross-pressed gratings provide greater strength when subjected to stress and are therefore recommended for areas such as the turning point of a fork-lift truck or heavy vehicle. Gratings are supplied with fixing clips to clamp the panel to the support structure. Panels and support steelwork are supplied hot-dip galvanized with an option for an additional polyester powder coating to any RAL colour. Type PLX (pressure locked): cross pressed gratings manufactured from flat bars of an unequal depth, both of which are notched to produce a secure joint to withstand stress. They are available in the following mesh sizes (c/c): 22×66, 33×33, 33×66, 25×66 and 66×33 mm. The bearing bar can vary from 30×4 to 150×6 mm and the transverse bar from 15×4 to 30×6 mm. Class 2 – vehicle with total mass of 3,000kg, normally a car, and a dynamic load of 10kN on a wheel imprint of 200x200mm. Class 3 – vehicle with total mass of 6,000kg, normally a rigid lorry, and a dynamic load on the front axle of 15 kN and 30 kN on the rear axle on a wheel imprint of 400x200mm. Class 4 – vehicle with total mass of 45,000kg, normally an articulated lorry, and a dynamic load on the rear axle of 90 kN on a wheel imprint of 600x250mm.


No catalogs are available for this product.

See all of LANG AND FULTON‘s catalogs
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
Galvanized Steel Grating