YPE html PUBLIC "-//W3C//DTD XHTML+RDFa 1.0//EN" "http://www.w3.org/MarkUp/DTD/xhtml-rdfa-1.dtd">
The Securifor® 358 system is a total system that consists of heavy, high-security welded panels in an anti-climb rectangular mesh, supported by a choice of posts.
- Vandal-resistant: anti-climb and anti-cut
- Secure and discreet
- Efficient deterrence
- Excellent visibility through the fence
- Secured by Design, LPCB and CPNI rated systems available
Secure and discreet: A superior system for providing security where a discreet visual impact on the immediate environment is essential.
Vandal-resistant: Anti-Cut: Robust wire and weld joints make cutting very difficult using a conventional bolt or wire cutters. Anti-Climb: No toe or finger holds due to small mesh apertures.
Good viewing visibility: The panels have excellent visibility characteristics, due to the flat two-dimensional profile the fence appears almost invisible. This is particularly important for unobstructed camera surveillance, either from the front or at an angle.
Durability: The high-quality coating technology guarantees an extended product life span and low maintenance due to advanced anti-corrosion properties
Accreditation: Secured by Design, LPCB and CPNI rated systems available.
NOTE: Securifor 358 is manufactured in European & South African factories. Specifications are different depending on the factory, please check all specifications carefully.
Panels are made of a heavy, high-security welded mesh 2 518.6 mm wide (3050 mm wide in South Africa). Several panels can be installed one above the other. Panels in one piece up to 6 m high are also available.
For maximum security, the mesh is 12.7 x 76.2 mm (H x W), with a 4 mm wire diameter.
Weld strength: 50% of the minimum tensile strength of the wire. In tests, performed by specialized police departments, the mesh had a delay factor 40x greater than other standard fence products - a vital requirement to capture potential escapees.
Fully tested to comply with the security standards in Europe.
Featuring a toe and finger proof mesh aperture, this system combines an anti-climb and anti-cut fence with excellent resistance to vandalism and visibility for use with CCTV.
Extra length panels or underdigs can be supplied (+300 mm) for installation below ground to prevent burrowing.
The Securifor system is supplied with matching gates using the same high-security mesh infill as the fence. Single or double- swing or sliding gates can be manufactured on request with Securifor panels infill.
Panels are made out of galvanized wires. An adhesion coating is given for perfect bonding with the polyester coating (min. 100 microns).
The panels are also available coated in Zincalu Super (95% zinc, 5% aluminum) or galvanized and polyester coated for long life protection.
- Green RAL 6005
- Anthracite RAL 7016
- Other RAL colors are available on request.
South African Manufacturing:
Panels are made out of Zincalu® Super core wires. Optional coating of superior PVC ads extra longevity and resistance to corrosion.
- Anthracite RAL 7021
- Zincalu Super
|Dimensions of the panels
L x H
|2 000||2 518.6 x 2 010.6|
|2 400||2 518.6 x 2 417.0|
|3 000||2 518.6 x 3 001.2|
|4 000||2 518.6 x 4 004.5|
|6 000||2 518.6 x 6 011.1|
cfr. installation guide: available on request
|Nominal Fence Height
|Panels Width x Height (mm)||Angle Iron Post||Angle Iron Bottom Rail|
|Length (mm)||Measurements (mm)|
|Wire thickness = 4mm
3mm wire thickness available on request
|2 400||2 375 x 3 050||3000||2996 x 40 x 40 x 3|
|3 000||2 985 x 3 050||3600||2996 x 40 x 40 x 3|
|Securifor 358 Singleskin Technical specification|
|Securifor 3510 Singleskin Technical specification|
Other heights available on request (MTO)
Select products you would like to include in your tender. Pay attention to select compatible Panels/Rolls & posts system. By clicking on "Generate your tenders" you'll receive a PDF document with detailed description.
If you want to add other products to your tender, you need to create a new configuration. You can manage this on our Tender Tool page.
Access our library of free BIM Objects and download Betafence product drawings in either CAD or Revit format by clicking on the relevant logos.